OMNIRAY SR line

Omniray è un nuova linea di diffusori audio professionali. SR è una linea completa di prodotti progettati per garantire una qualità del suono costante e una affidabilità a lungo termine per una vasta gamma di applicazioni audio pro.

Zingali, è uno dei principali costruttori di altoparlanti al mondo. Fondata nel 1986, l’azienda si dedica alla creazione di soluzioni pratiche basate su una ingegneria solida.

Omniray® Sr108
Unconventional Compact Loudspeakers

The 2-way loudspeaker system shall have 1 x 8” cone transducer for the low freq and a 1” neodymi- um compression driver on a low distortion Omni- ray® Waveguide and Horn with Symmetrical disper- sion on our proprietary ALLWOODHORN . The sys- tem’s horizontal coverage is 90° and vertical is 70° Rotable.
Nominal Sensitivity shall be 101dB. When driven by an amplification capable of delivering 800 Watts into an 8Ω (nominal) load, the system, shall be capable of 124dB to 127dB peak SPL, with a fre- quency response of 72Hz to 18kHz ±3dB (64Hz to 20KHz -6dB).
2 Speakon Nl4 In OUT for connection. FullRange op. mode. pin 1+1-, pin 2+2- n.c

OMNIRAY Sm112

CONCERT SOUND WEDGE MONITOR

Omniray Sm112
The 2-way Wedge Monitor loudspeaker system shall have 1 x 12 neodymium cone transducer for the low freq. and a 1/4 inch neodymium compression driver on a low distortion Omniray® Waveguide Asymmetrical dispersion on proprietary ALL-WOOD horn. The system’s horizontal coverage is 90° with vertical coverage 45×60° Rotable. Nominal Sensitivity shall be 103dB. When driven by an amplification capable of delivering 1200 Watts into an 8Ω (nominal) load the system, shall be capable of 129dB to 132dB peak SPL, with a frequency response of 60Hz to 18kHz ±3dB (50Hz to 18KHz -6dB).
2 Speakon Nl4 In OUT for connection.

Omniray® Sr112
Unconventional Loudspeakers

The 2-way loudspeaker system shall have 1 x 12” Neodymium cone transducer for the low freq and a 1/4” neodymium compression driver on a low dis- tortion Omniray® Waveguide and Horn with Sym- metrical dispersion on our proprietary ALLWOOD- HORN . The system’s horizontal coverage is 90° and vertical is 70° Rotable.
Nominal Sensitivity shall be 102dB. When driven by an amplification capable of delivering 1200 Watts into an 8Ω (nominal) load, the system, shall be ca- pable of 127dB to 130dB peak SPL, with a frequen- cy response of 54Hz to 18kHz ±3dB (48Hz to 20KHz -6dB).
2 Speakon Nl4 In OUT for connection. FullRange op. mode. pin 1+1-, pin 2+2- n.c

Omniray® Sr212
Unconventional Loudspeakers

The 2-way loudspeaker system shall have 2 x 12” Neodymium cone transducer for the low freq and a 1/4” neodymium compression driver on a low dis- tortion Omniray® Waveguide and Horn with Sym- metrical dispersion on our proprietary ALLWOOD- HORN . The system’s horizontal coverage is 90° and vertical is 70° Rotable.
Nominal Sensitivity shall be 103dB. When driven by an amplification capable of delivering 2400 Watts into an 4Ω (nominal) load, the system, shall be ca- pable of 129dB to 132dB peak SPL, with a frequen- cy response of 50Hz to 18kHz ±3dB (46Hz to 20KHz -6dB).
2 Speakon Nl4 In OUT for connection. FullRange op. mode. pin 1+1-, pin 2+2- n.c

Omniray® Sw112
Unconventional Subwoofer

The 1×12” Subwoofer loudspeaker system shall have 1 x 12” cone transducer, the cone drivers are housed in a 24 mm birch finnish ALLWOOD made enclosure, optimally Omniray® tuned and vented. The enclosure geometry makes vertical ground- stacking easy.
Nominal Sensitivity shall be 100dB. When driven by an amplification capable of delivering 1000 Watts into an 8Ω (nominal) load, the system, shall be ca- pable of 129dB to 133dB peak SPL, with a frequen- cy response of 45Hz to 120Hz ±3dB.
Optimized Factory preset available. Stackable in both vertical and Horizontal use. 2 Speakon Nl4 In OUT for connection. FullRange op. mode. pin 1+1-, pin 2+2- n.c
n.c

Omniray® Sw118
Unconventional Subwoofer

The 1×18” Subwoofer loudspeaker system shall have 1 x 18” cone transducer, the cone drivers are housed in a 24 mm birch finnish ALLWOOD made enclosure, optimally Omniray® tuned and vented. The enclosure geometry makes vertical ground- stacking easy.
Nominal Sensitivity shall be 102dB. When driven by an amplification capable of delivering 2000 Watts into an 8Ω (nominal) load, the system, shall be ca- pable of 131dB to 137dB peak SPL, with a frequen- cy response of 38Hz to 120Hz ±3dB.
Optimized Factory preset available. (cardioid preset and configuration mode also available)
Stackable in both vertical and Horizontal use.
2 Speakon Nl4 In OUT for connection.
FullRange op. mode. pin 1+1-, pin 2+2- n.c

Omniray® Sw212
Unconventional Subwoofer

The 2×12” Subwoofer loudspeaker system shall have 2 x 12” cone transducer, the two cone drivers are housed in a 24 mm birch finnish ALLWOOD made enclosure, rectangular, optimally Omniray® tuned and vented.
The enclosure geometry makes vertical ground- stacking easy.
Nominal Sensitivity shall be 103dB. When driven by an amplification capable of delivering 4000 Watts into an 4Ω (nominal) load, the system, shall be ca- pable of 132dB to 138dB peak SPL, with a frequen- cy response of 40Hz to 120Hz ±3dB.
Optimized Factory preset available. Stackable in both vertical and Horizontal use. 2 Speakon Nl4 In OUT for connection. FullRange op. mode. pin 1+1-, pin 2+2- n.c

Omniray® Sw215
Unconventional Subwoofer

The 2×15” Subwoofer loudspeaker system shall have 2×15” cone transducer, the cone drivers are housed in a 24 mm birch finnish ALLWOOD made enclosure, optimally Omniray® tuned and vented. The enclosure geometry makes vertical ground- stacking easy.
Nominal Sensitivity shall be 104dB. When driven by an amplification capable of delivering 4000 Watts into an 4Ω (nominal) load, the system, shall be ca- pable of 134dB to 140dB peak SPL, with a frequen- cy response of 40Hz to 120Hz ±3dB.
Optimized Factory preset available. (Cardioid preset and configuration mode also available)
Stackable for both vertical and Horizontal use.
2 Speakon Nl4 In OUT for connection.
FullRange op. mode. pin 1+1-, pin 2+2- n.c